ARCHITECTURAL WOOD DOORS
800.827.1615
WWW.VTINDUSTRIES.COM/DOORS
P.O. BOX 490
HOLSTEIN, IA 51025
Rev. 6/18
GUIDE TO FILLING OUT VT INDUSTRIES FLUSH DOOR MACHINING SHEETS
This guide is intended to aid VT customers in filling out our machining sheets. All applicable boxes
should be filled
out to ensure the doors get prepped properly. If you have any questions please
consult your Order Process Guide
or your VT customer service center representative.
1.
The date the sheets were prepared by the customer.
2.
Name of the person VT should contact with questions.
3.
Current page number/total number of pages (example: 1/6 read as page 1 of 6).
4.
Check the box indicating Heritage
5.
Name of job.
6.
VT job number.
7.
Core type or VT door type (example: 404, 8P08, 5502, 5P11, etc.).
8.
STC Rating (example: 30, 31, 33, 35, etc.)
9.
Fire rating (example: 20-, 45-, 60-, 90-minute). Also specify if frames are to be positive
pressure.
10.
High pressure decorative laminate color and number or wood veneer species, cut, match, and
assembly.
(Exampl
e: 858-58 Formica pumice or plain slice white maple book and running).
11.
Check the box of how you want the stiles finished.
12.
Enter Factory Finish color for veneer door.
13.
Check the box for the environmental selection that applies to your order.
14.
Enter frame opening width X height (example: 3’0” X 7’0”).
15.
Enter prefit door width X height X thickness, allowing for stile clearance, top clearance
(typically 1/8”), and
undercut from concrete floor. (example: 2’11-3/4” X 6’11-1/4” X 1-3/4”).
Note: VT’s standard is to undersize
the width of a single door 1/4”, and to undersize the width
of single egress pairs 3/16” per leaf. Double egress
pairs should be downsized according to the
frame manufacturer’s standards. Prefit width should reflect
downsizing for continuous hinges,
surface edge guards, etc.
16.
Check if you have a top, bottom, or set of flushbolts.
17.
For the inactive leaf of pairs, enter the flushbolt manufacturer, manufacturer’s model number,
and size if
applicable (example: DCI 945 or Trimco 3917-12”).
18.
Check if blocking is required. VT’s standard is 5” if blocking is requested or specify the
dimension
needed.