Agilent Vials and Sample
Containment Solutions
Your essential resource for autosampler vial selection
2 Agilent Vials and Sample Containment Solutions
Proven Value 3
Agilent Certified vials 4
Agilent A-Line vials 5
Vial Selection 6
Agilent Vials Compatibility Chart 6
Sample size 13
Component options 13
Closures 14
Compatibility of septa and sample 14
Compatibility of septa and cap 15
Crimp cap vs. screw cap 15
Where to measure to match the vial size with its cap 16
Specialized Applications 17
Deactivated vials 17
Polypropylene vials 17
Ordering Information 18
Containment Solutions for Sample Volumes (<2 mL) 19
Vials 19
Inserts 20
Well plates 21
Mats 21
Table of Contents
Containment Solutions for Sample Volumes of 2 mL 22
Vials 22
Crimp caps 23
Screw caps 24
Snap caps 25
Convenience packs 26
Pre-assembled packs 26
Vial kits 27
Containment Solutions for Sample Volumes (>2 mL) 28
Vials, caps, kits, and septa for 4 mL volumes 28
Vials, caps, septa, and seals for >4-10 mL volumes 28
Headspace vials 29
Headspace caps 30
Headspace septa and stoppers 30
Headspace kits 31
LC high recovery vials 31
Purge and trap vials, caps, and septa 31
Storage vials 31
Bonded caps 32
Test tubes 32
Accessories 33
Agilent CrossLab 35
Proven Value
3
www.agilent.com/chem/vials
30%
time savings
Save time using
our full range of
short-thread screw
top vials and caps.
1 0 +
compatible brands
Agilent vials/caps
are compatibility
tested with over 10
instrument brands.
$ 0
for technical support
Unlike some other
suppliers, Agilent
does not charge you
for technical support.
Up to
$100K
saved anually
by a number of
customers, using Agilent
technical support and
recommended vials.
3 0 +
inspection points
So you get the
tightest dimensional
specifications,
every time.
3 3 / 5 1
best in glass
All vials are made of
type 33-51 coefficient
of expansion for
top performance.
5 0 %
faster crimp speed
Our electric crimper
lets you crimp your
vial quickly and
efficiently.
25%
cost savings
Save up to 25%
in operating
costs with
A-Line vials.
It’s easy to think of vials as simple, inexpensive components that don’t affect your results.
However, substandard vials, caps, and septa can lead to sample loss, contamination, and
damaged autosampler needles.
Stop unexpected peaks from
impacting your results
Sometimes, vials measure the indirect effects of the analytical
flow path instead of the sample. With Agilent vials, you know
that only your sample is being measured, nothing else.
Agilent offers a comprehensive solution for getting your
samples from injection to detection with minimal interference
to maximize your productivity.
Agilent understands that vials are a critical part of your analytical
workflow—no less important than the column or the instrument.
This is why Agilent vials are designed to meet the high standards
you expect from every Agilent product. These standards include:
– Consistent lot-to-lot performance
– Rigorous quality control and manufacturing
– Better value for your money
– Easy selection based on volume, sample type, and instrument
It's more than just a vial, it can affect your results
and return on instrument investment
Only Agilent vials have these quality and performance statistics
Facts and Figures
4 Agilent Vials and Sample Containment Solutions
Why gamble with your results?
Using poor-quality vials (or the wrong vials for your application)
can cause sequencing problems, unnecessary downtime,
expensive repairs, and the loss of precious samples
Certified integrity
and consistency
Agilent Certified Vials are
produced in an ISO 9001 certified
environment and packaged to
reduce contamination. Our vials are
pierce tested with Agilent needles
and syringes, inspected with
automated vision systems, and
compatible with autosampler
gripping and injection mechanisms.
Agilent vials are reliable and consistent, saving time and money.
– Reduced labor: Our short-thread screw top vials make screwing/unscrewing
caps up to 30% faster.
– Less interference: Agilent vials are made from analytical grades 33 and 51 glass,
which will not remove analytes from sample matrices.
– Fewer septa issues: Agilent septa are continually being improved to limit leaching,
coring, sticking, push-through, hardness, and adsorption/absorption.
– Lower risk of breakage: Thicker glass walls help eliminate cracking during clamping,
and a unique packing box keeps vials safe during transit and storage.
– Fast delivery and easy ordering: Everything you need from one trusted supplier, with
worldwide distribution centers so your vial order reaches your lab within 48 hours.
– Free 24/7 technical support: Our team is always available to provide fast, expert
assistance, should any issues arise.
Save money, and eliminate
drains on your lab’s productivity
Agilent A-Line vials: Better analyte retention over time
5
www.agilent.com/chem/vials
Proven Value
Tips and tools
See our case study video on cost reducing:
www.agilent.com/chem/switch-vials-video
x10
3
0
1
2
3
4
5
+ESI TIC SRM
0.25 0.3 0.35 0.4 0.45
Counts
x10
3
x10
3
0
1
2
3
4
5
+ESI TIC SRM
Acquisition Time [min]
0.25 0.3 0.35 0.4 0.45
0
1
2
3
4
5
+ESI TIC SRM
0.25 0.3 0.35 0.4 0.45
Agilent
A-Line Vials
Waters TruView
(LC/GC) Vials
Thermo MS Certified
(LC/GC) Vials
PP t0
t0 t4
t12 t48
The Agilent A-Line vial shows superior analyte retention in this separation of doxepin.
Note: Tests were carried out by Agilent.
For more information on the comparison data, you can download the study at
www.agilent.com/chem/a-line-vials-poster
Agilent A-Line vials
The trusted choice for your precious samples
and high-precision analyses
– Save time: Dramatically reduce the number of sample reruns.
– Get higher throughput: Surface inertness reduces peak response variability for more
accurate results and less rework.
– Attain consistent recoveries: Be confident you’re getting the most precise and
consistent measurement from vial-to-vial, lot-to-lot, and over time, of low-level analytes.
– Spend less: Save up to 25% on your laboratory spend by significantly reducing
unplanned costs (such as troubleshooting, reruns, and downtime).
– Conform with demanding and regulated environments:
Our Certificate of Analysis provides specific data confirming vial appropriateness.
This is a simplified breakdown of various major branded autosamplers, including legacy and current models. This chart is accurate
as of June 2022. Newer autosampler models may be available and some legacy models may no longer be supported after this date.
For a newer, online version, which is updated every three to six months, please visit: http://www.agilent.com/chem/vial-compatibility
Vial Selection
6 Agilent Vials and Sample Containment Solutions
Vials Compatibility Chart for Major Worldwide Brands
Did you know?
Don't have an Agilent instrument? No problem.
Agilent vials perform seamlessly with many analytical instruments. Use the Vials Compatibility Chart
to determine which Agilent vials are compatible with your instrument manufacturer and model.
Did you know: 2 mL high-recovery screw top vials can be used with all autosamplers.
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Agilent 8035
● ●
1090, 1100, 1200
● ● ●
1260, 1290 Infinity
● ●
5880, 5890, 6850 (27 position tray), 6890
● ●
6850 (22 position tray)
●
7673A, 7683A
● ●
7693A
● ● ● ●
7695A
●
7697A
●
7985A
● ● ●
8000, 8100, 8200*, 8400,
CP-910 to 912
● ● ●
●
*
920-LC/940-LC
● ●
AQUATek 70
●
Archon purge and trap
●
COMBI PAL SPME
mode (32 position tray)
● ●
*Specicmodelsareonlycompatiblewithcertainscreworheadspacevialtypes.Model8200is
onlycompatiblewiththescrewformatindicatedbytheasterisk(10mm,2mL,10-425,FB).
(continued)
Vial Selection
7
www.agilent.com/chem/vials
(continued)
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Agilent COMBI PAL SPME
mode (98 position tray)
● ● ●
COMBI PAL (200 position tray)
GC PAL (200 position tray)
●
COMBI PAL (32 position tray)
GC PAL (32 position tray)
● ●
COMBI PAL (98 position tray)
GC PAL (98 position tray)
● ● ●
CP-9010
● ● ●
CP-9020/CP-9025/ CP-9060
●
CP-940, 941
●
CTC COMBI PAL
● ●
CTC GC PAL
● ●
CTC HTS+HTC PAL
● ● ●
G1888A
● ●
Genesis
● ●
GPC 110/210/220
● ● ● ●
HS7694
● ●
LC 9100/LC 9095/ LC 9090
● ● ●
Marathon basic, standard,
96 position
● ● ● ●
PL-AS RT
● ● ● ● ● ●
ProStar 400, standard,
96 position tray
● ● ● ● ●
ProStar 410, large capacity,
96 position tray
● ● ● ● ●
Learn more
From instruments to columns and supplies, find everything you need from one
trusted supplier. Better injections, better chromatography.
No matter what your sample introduction needs are, Agilent has a sampler
to support your lab’s productivity.
For Agilent GC autosamplers, visit www.agilent.com/chem/GCsampleintro
For Agilent LC autosamplers, visit www.agilent.com/chem/lc-injection-system
Vial Selection
8 Agilent Vials and Sample Containment Solutions
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Agilent ProStar 410, large volume,
24 position tray
●
ProStar 410, standard,
84 position tray
● ● ● ● ● ●
ProStar 420,
LSV, 72 position tray
●
ProStar 420, standard,
96 position tray
● ● ● ● ●
ProStar 420,
Super-LSV, 32 position tray
●
ProStar 430, 48 position tray
● ● ● ●
Tekmar SOLATek72
●
Vista
● ●
Beckman
Coulter
501, 502, 507
● ● ● ● ●
508
● ●
Marathon, Promis
● ● ● ●
Triathlon
● ● ● ● ● ●
Bruker LC51
●
Map II
● ● ● ●
CTC A200 LC
● ● ● ● ● ●
A200S
● ● ● ●
Combi-xt (L-mode), GC-xt Headspace,
PAL HPLC-Systems, HTS-xt, HTX-xt, PAL
● ● ● ● ● ●
Combi-xt Headspace,
Combi-xt SPME Option
● ● ●
HS 500
●
DANI ALS 39.80, 86.80, 1000
● ● ●
HS39.50, HS86.50
●
Master AS
● ● ● ●
GE
Instruments
Sievers 900
●
GERSTEL MPS 2**, 3
● ● ● ●
●
** ●**
**Specicmodelsareonlycompatiblewithcertainscreworheadspacevialtypes.ModelMPS2isonlycompatible
withtheheadspaceformatsindicatedbytheasterisk(23mm,10mL,RBand23mm,10and20mL,23x75mm,RB).
(continued)
Vial Selection
9
www.agilent.com/chem/vials
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Gilson 201/202, 221/222, 231/401,
232/402, Aspec, AspecXli, Aspec XL 4,
235/235P/SP 235/ SP 235P
● ●
234, 235, 215, 250,
231XL/232X- L/233XL
● ● ●
JASCO AS 2055/AS 2055 (i),
v AS 2057/AS 2057 (i), AS 2059
● ● ● ● ●
LEAP
Technologies
Combi PAL (32 position)
● ●
Combi PAL (98 position),
SPME (98 position)
● ●
Combi PAL SPME Mode (32 position)
●
HTX PAL, HTC PAL, HTS PAL
(32 position)
●
LC PAL (216 Pos.), HTX PAL, HTC PAL,
HTS PAL (54/98 position tray)
● ● ● ● ● ●
O.I. Analytical 1020A,1088,1096,4551A,1552
●
PerkinElmer AI-1, AS-100/(B), AS300, AS8300
●
Clarus 400, 500, 600
●
HS40/HS100/101
●
Integral 4000, ISS
● ●
Series 200 vial tray, AS2000/AS2000B
● ●
TurboMatrix HS16/ HS40/HS40 XL/
HS40 Trap/HS110/ HS110 Trap
● ●
Shimadzu AOC-14/1400
● ● ● ● ● ● ●
AOC-17
● ● ● ● ● ●
AOC-20/20i/20s,
96 position tray
●
AOC-20/20i/20s,
150 position tray
● ● ● ● ●
AOC-5000
● ● ● ●
ASI-V
●
HSS-2B
● ● ●
HTA 200 H
● ●
(continued)
Vial Selection
10 Agilent Vials and Sample Containment Solutions
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Shimadzu LC2010C + LC2010A,
100 position tray
●
LC2010C + LC2010A,
140 position tray
● ● ● ● ●
LC2010C + LC2010A,
350 position tray
LC-20A, SIL-2AS, SIL-6A, -6B,
-7A, -8A, -9A
● ● ● ● ● ●
SIL 30-ACMP
● ● ●
SIL-10A/SIL-10AF/SIL-10AP/
SIL-10Ai/SIL-10AxL/Rack L,
80 position
●
SIL-10A/SIL-10AF/SIL-10AP/
SIL-10Ai/SIL-10AxL/Rack S,
100 position
● ● ● ● ●
SIL-10A/SIL-10AF/ SIL-10AP/
SIL-10Ai/SIL-10AxL/Rack MTP2,
192 position
SIL-10ADvp
● ● ● ● ● ●
SIL-10HTA/SIL-10HTC,
100 position tray
●
SIL-10HTA/SIL-10HTC,
350 position tray
SIL-10HTA/SIL-10HTC,
140 position tray
● ● ● ● ●
SIL-20A (Prominence) 105 vial tray/
SIL-20AC (Prominence), 70 vial tray
● ● ● ● ●
SIL-20A/Sil-20AC (Prominence),
175 vial tray
SIL-20A/Sil-20AC (Prominence),
50 vial tray
●
SIL-20AXR/SIL-20ACXR (Prominence),
175 (1 mL vials), 70 (1.5 mL vials),
50 (4 mL vials)
● ● ● ● ●
SIL-30AC (Nexera), 175 (1 mL vials),
105 (1.5 mL vials), 50 (4 mL vials)
● ● ● ● ●
(continued)
Vial Selection
11
www.agilent.com/chem/vials
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Teledyne
Tekmar
7000/7000HT/7050
●
AQUATek 70/ SOLATek 72
●
HT3
● ●
STS 8000 TOC
●
Thermo
Fisher
Scientific
Accela High Speed LC Autosampler
(200 position)
● ● ● ●
Accela Open Autosampler
● ● ●
AS 40
●
AS 50
● ● ● ●
AS100
● ● ● ●
AS1000,200
● ● ●
AS2000 90 vial tray (Trace GC),
200S, AS800
● ● ●
AS300, A200LC, SpectraSystem
AS 100-3500
● ● ● ●
ASE 200
●
Dionex AS 40
●
Dionex AS-AP
● ● ● ● ●
Dionex UltiMate WPS-3000
● ● ● ● ● ●
Gina 50
● ● ● ●
HiPerTOC
●
HS250-500
●
Tips and tools
Here’s why “bargain” vials are not much of a bargain
Bargain vials can be made from type 70 or 71 COE glass, which has high metal content that
can remove analytes or destabilize the analyte through alkyl leaching. Agilent vials are made
from type 33 and 51 glass so you can be confident that your results will not be compromised.
To learn more about glass quality, download our free white paper at
www.agilent.com/chem/vialsresources
Vial glass types
ASTM E438 Type I
Class A
Linear COE
ASTM E438 Type I
Class B
Linear COE
32 – 33 (+/– 1.5) 48 – 56 (+/– 2.0)
Coecient of expansion (COE) compliance –
0 to 300 °C, cm/cm x C x 10
-7
(acceptable expansions
for analytical chromatographic purposes).
(continued)
Vial Selection
12 Agilent Vials and Sample Containment Solutions
Manufacturer Model Crimp Snap Screw Headspace VOA
Vial Septum Seat Diameter (mm) 11 11 8 9 10 13 23 23 23 23 28
Vial Size (mL) 2 2 2 2 2 4 10 20 10 & 20 10 & 20 20 & 40
Vial Thread Style 8-425 9-425 10-425 13-425 24-400
Bottom (FB – Flat Bottom,
RB – Round Bottom)
FB FB FB FB FB FB RB RB RB FB FB
Thermo
Fisher
Scientific
HS800-2000
● ●
HS-HV
●
Summit ASI 100, Analytical Tray
(117 position), Summit ASI 100,
Semipreparative tray (63 position)
● ● ● ● ●
Surveyor (Surveyor Plus)
● ● ● ● ●
Trace 1300 Series
● ● ● ● ● ● ●
TriPlus (=GC PAL) (AS+ Duo)
● ● ● ● ●
TriPlus 300
●
TriPlus HS, SPME
● ●
TriPlus RSH
● ● ● ● ● ●
UltiMate Analytical, WPS 3000sl,
120 position (2 mL),
FAMOS (LC Packings–Dionex)
● ● ● ● ● ●
UltiMate Nano/Cap/Micro,
WPS-3000 SL, 216 (3 x 72)
position rack (1.2 mL)
●
UltiMate Semipreparative, WPS-3000 SL,
66 (3 x 22) position rack (4 mL)
● ●
Need more information?
Make productivity happen, regardless of application or instrument vendor.
Improve cycle time, eliminate variability, and enhance your results at every step of your workflow.
For information on GC, GC/MS, or GC headspace, visit www.agilent.com/chem/productivityGC
To view our GC flow path supplies, visit www.agilent.com/chem/inert
For LC and LC/MS products, visit www.agilent.com/chem/productivityLC
Glass vials (2 mL)
Polypropylene
vials (2 mL)
Deactivated/silanized
vials (2 mL)
High recovery vials (30 µL to 1.5 mL)
Inserts (100 µL to 400 µL)
Well plates (150 µL to 1.2 mL)
Polypropylene
vials (250 µL)
Microcentrifuge
tubes (500 µL)
Vials with integrated
inserts (250 µL to 300 µL)
4 mL
vials
6 mL
vials
40 mL
vials
Headspace vials
(10 mL to 20 mL)
High recovery
vials (15 mL)
Storage vials (4 mL to 40 mL)
<2 mL 2 mL >2 mL
For Archon
purge and trap
15 µL
Test tubes (3.5 mL to 60 mL)
Vial Selection
13
www.agilent.com/chem/vials
Microvials (15 µL to 800 µL)
Vial Cap Septa Insert
Sample Volume
60 mL
How do vial components factor in?
Vial caps, septum, and inserts prevent leakage and sample loss due to
evaporation. Like Agilent vials, Agilent vial components receive the same
high level of attention during design and manufacture. They also work
seamlessly with Agilent vials so that complex runs proceed smoothly.
Protect sample integrity by choosing
the best vial for your application
By matching our vials to your application, you can contain samples with minimal interference from
the surrounding environment, and ensure optimal sample interface with your analytical platform.
To help you get started, we’ve answered the most common questions about vial selection below.
Which vial is best for my sample size?
There are several factors to consider, including analysis type, analytical platform, and sample availability.
Agilent vials offer the same highly consistent performance across the entire size range, from 15 µL to 60 mL.
Use the diagram below as a starting point for choosing the size you need based on your sample volume.
Vial Selection
14 Agilent Vials and Sample Containment Solutions
*PTFE/silicone/PTFEhasthesamechemicalcompatibilityofPTFEonlyuntilpunctured.
Septa Chemical Compatibility
PTFE PTFE/Silicone PTFE/Silicone/PTFE* PTFE/Red Rubber Fluoroelastomer PTFE/Butyl
Acetonitrile
● ● ● ● ●
Hydrocarbons (hexane, heptane, methane)
● ● ● ●
Methanol
● ● ● ● ●
Benzene
● ● ●
THF
● ●
Toluene
● ●
DMF
● ● ● ●
DMSO
● ● ● ●
Ether
● ● ●
Chlorinated solvents (methylene chloride)
● ● ●
Alcohols (ethanol)
● ● ● ● ● ●
Acetic acid
● ● ● ●
Acetone
● ● ●
Phenol
● ● ● ● ●
Cyclohexane
● ● ● ●
Tips and tools
For highly sensitive samples, we recommend PTFE-lined (“sandwiched”)
septa, because the PTFE layers act as a chemically resistant barrier.
How do I choose the right closure?
There are three major factors to consider when selecting a closure.
Compatibility of septa and sample
Make sure the septa you choose are chemically compatible with your sample and solvent. Chemical compatibility
can vary, based on factors such as solvent concentration, molecular weight, and temperature.
During manufacture, Agilent septa undergo thermal and chemical conditioning to reduce siloxane bleed, which can
occur when the septa material is stressed during heating, solvent interaction, or piercing by the autosampler needle.
5183-4496
5183-4437
Vial Selection
15
www.agilent.com/chem/vials
Crimp cap vs. screw cap
Based on decades of chromatography experience, we have found that crimp cap vials tend to be best
for GC and GC/MS applications, while screw cap vials are generally used for LC and LC/MS applications.
However, your specific application—as well as your personal preference—are also factors to consider.
Although both types of caps deliver a good seal, crimp caps provide extra security for food, forensics,
and other applications where sample tethering needs to be avoided. We also recommend
a screw cap vial if you are working with volatile compounds.
Compatibility of septa and cap
Use the chart below to determine the right cap and septa combination, based on your application.
Note: septa that are too thick can prevent the cap from fitting properly on the vial.
If siloxane interference is a concern for your application, we recommend Agilent Certified caps and
Agilent Certified bonded caps. They provide the industry’s lowest bleed profile for better analytical
sensitivity, reduced downtime, and improved productivity.
Cap and Septa Compatibility
High Performance
Septa
Thin PTFE PTFE/Silicone* PTFE/Silicone/
PTFE*
PTFE/Red Rubber Fluoroelastomer Butyl
Temperature range 40 to 300 ºC** Up to 260 ºC –40 to 200 ºC –40 to 200 ºC –40 to 90 ºC –40 to 260 ºC –50 to 150 ºC
Use for multiple
injections
No No Yes Yes No No No
Price Most expensive Very economical Economical Most expensive Very economical Economical Economical
Resistance to coring Excellent None Excellent Excellent None None None
Recommended for
storage
No No Yes Yes No No No
Best for High temperature
headspace
applications
Superior chemical
inertness, short
cycle times, and
single injections
Most common
HPLC and GC
analyses, not as
resistant to coring
as P/S/P
Superior
performance for
ultra trace analyses,
repeat injections,
internal standards
Chlorosilanes, more
economical option
for single injections
Chlorinated solvents,
higher temperatures
Organic solvents,
acetic acids,
impermeable
to gasses
*Agilentsiliconeisperoxide-cured,makingitmoreinertandlesslikelytointeractwithsamples.
**Foruptoonehour
5188-5386 5190-3986 5182-0552
Vial Selection
16 Agilent Vials and Sample Containment Solutions
B
D
C
A
B
D
C
A
Where to measure to match the vial size with its cap
Determine the right vials and caps for your needs. The table, with corresponding diagrams,
shows where to take the measurement.
Vial and Closure Dimensions
Cap Type Septum
(Diameter)
Vial Closure
(Septum Seat Diameter)
Vial Closure
(od)
Vial Closure
(Opening id)
Comments
2 mL (wide opening)
Screw 9 mm 9 mm 12 mm 6 mm
Crimp 11 mm 11 mm 11 mm 6 mm Closure od and septum seat diameter are
very close since the crimp cap wall is thin.
After rounding, they are both 11 mm.
Snap 11 mm 11 mm 12 mm 6 mm
2 mL (short opening)
Screw 8 mm 8 mm 12 mm 5 mm Closure od is measured at the flared base.
20 mm Headspace
Crimp 20 mm 20 mm 21 mm 9 mm The septum has a larger od than the septum
seat diameter to provide a snug fit. This prevents
septum loosening.
20 mm Headspace
Screw 18 mm 18 mm 19 mm 8 mm Closure od is measured at the flared base.
Closure when adjoined to screw top vial.
B = Septa seat diameter
C = Cap body diameter (vial closure od)
D = Cap opening id (vial closure opening id)
Septum only.
A = Septum diameter
Vial Selection
17
www.agilent.com/chem/vials
What about more
specialized applications?
Deactivated vials
For pesticides, semivolatiles, and other highly sensitive samples—as well
as samples that are prone to sudden pH shifts—deactivated vials are best,
because their surface is more hydrophobic and inert.
We also recommend deactivated vials for exacting applications, such as
mass spectrometry, to prevent sample interactions before analysis.
Polypropylene vials
Polypropylene vials are an excellent choice for biological and PFAS
applications, and for applications involving samples with high metal
content—such as ion chromatography, AA, or ICP-MS.
Agilent thoroughly tests and evaluates various polypropylene materials
before selecting the grade used in our polypropylene vials. Our vials
have the lowest levels of extractables to ensure sample integrity.
Need more information?
Hundreds of choices, one easy guide
Use our online selection tool to quickly find the right products for complete
confidence in your sample containment.
– Answer a few simple questions to identify your best options
– Search by technique, product number, or vial type
– Choose from over 600 vials, caps, and septa
Go to www.agilent.com/chem/selectvials
5183-4496
5191-8150
Dimensions:
Recommended fill:
Part number:
28 x 4.8 mm
150 µL
5183-2088
31 x 4.8 mm
150 µL
5183-2089
31 x 4.8 mm
200 µL
5183-2090
30 x 5.6 mm
250 µL
5181-1270
31 x 5.6 mm
250 µL
5183-2085
31 x 5.6 mm
400 µL
5181-3377
Dimensions:
Recommended fill:
Part number:
32 x 12 mm
1.3 mL
5184-3551
32 x 12 mm
1.5 mL
5181-3375
32 x 12 mm
1.2 mL
5182-3454
32 x 12 mm
250 µL
9301-1388
32 x 12 mm
1.5 mL
5182-0714
32 x 12 mm
1.5 mL
5183-4428
32 x 12 mm
1.2 mL
5183-2030
32 x 12 mm
250 µL
5188-6591
32 x 12 mm
1.3 mL
5184-3550
32 x 12 mm
250 µL
9301-0977
Glass insert
32 x 12 mm
250 µL
5188-2788
32 x 12 mm
250 µL
5188-5390
Glass insert
32 x 12 mm
250 µL
5190-2242
32 x 12 mm
700 µL
5182-0567
Dimensions:
Recommended fill:
Part number:
37 x 22 mm
6 mL
9301-1377
45 x 15 mm
4 mL
5183-4448
37 x 22 mm
6 mL
9301-1419
Dimensions:
Recommended fill:
Part number:
75 x 22 mm
20 mL
5182-0837
45 x 22 mm
10 mL
5182-0838
45 x 22 mm
10 mL
5183-4475
75 x 22 mm
20 mL
5183-4474
Wide opening screw top vials (9 mm)
Narrow opening
screw top vials (8 mm) Wide opening crimp top vials (11 mm)
Inserts for wide opening vials (11 mm and 9 mm)Inserts for narrow opening vials (8 mm)
Headspace vials
Polypropylene vials with screw topPolypropylene vials with crimp/snap top
Large volume vials
Find the Right Products for Complete
Confidence in Your Sample Containment
Agilent vials, caps, and septa have been engineered and designed with the same high quality we build into Agilent instruments.
When you put our 40 years of innovation and excellence into your vials and caps, you can have complete confidence in your results.
This is a selection of vials, not the entire portfolio.
Ordering Information
18 Agilent Vials and Sample Containment Solutions
Containment Solutions for Sample Volumes (<2 mL)
Vials
Description Sample Volume Material Certied
Unit
Part No.
Microvials
Wine-glass shape, screw top, 12 x 32 mm 15 µL Glass, clear
100/pk
5184-3550
15 µL Glass, amber
100/pk
5184-3554
Wine-glass shape, crimp top, 12 x 32 mm 15 µL Glass, clear
100/pk
5184-3551
15 µL Glass, amber
100/pk
5184-3555
Crimp top, tapered, 6 mm 100 µL Glass, clear
500/pk
5180-0844
Crimp top, round bottom, 6 mm,
for HTS and HTC PAL liquid injection
300 µL Glass, clear
500/pk
5180-0841
Crimp/snap top 700 µL Polypropylene
100/pk
5182-0567
High recovery vials
Crimp top 1.5 mL with 30 µL reservoir Glass, clear
100/pk
5182-3454
1.5 mL with 30 µL reservoir Glass, clear (silanized)
100/pk
5183-4497
Screw top 1.5 mL with 30 µL reservoir Glass, clear
100/pk
5183-2030
1.5 mL with 30 µL reservoir Glass, amber
100/pk
5183-2073
Microcentrifuge
Microcentrifuge tubes 500 µL
100/pk
9301-6384
Polypropylene vials
Crimp/snap top 250 µL Polypropylene Y
100/pk
5188-2788
250 µL Polypropylene
1,000/pk
5190-3155
Screw top 250 µL Polypropylene Y
100/pk
5190-2242
250 µL Polypropylene Y
1,000/pk
5190-2243
1 mL Polypropylene
100/pk
5191-8150
Vials with integrated inserts
Screw top, with glass insert 250 µL Polypropylene
100/pk
5188-5390
Crimp/snap top, with glass insert 250 µL Polypropylene
100/pk
9301-0977
250 µL Polypropylene Y
100/pk
9301-0978
Screw top, with fixed insert 300 µL Glass, clear
100/pk
5188-6591
Crimp top, with fixed insert 300 µL Glass, clear
100/pk
9301-1388
Screw top, with fixed insert 300 µL Glass, amber
100/pk
5188-6592
Crimp top, with fixed insert 300 µL Glass, amber
100/pk
5188-6572
Ordering Information
19
www.agilent.com/chem/vials
5191-8150
Inserts
Description Sample Volume Material Certied Unit Part No.
Vial insert 100 µL Y 500/pk
9301-1387
Vial insert, for 2 mL standard opening (8 mm)
screw top vials
150 µL Glass with polymer feet 100/pk
5183-2088
Vial insert, 200 µL measured fill (150 µL recommended),
for 2 mL standard opening (8 mm) screw top vials
150 µL Pulled point glass 100/pk
5183-2089
Vial insert, flat bottom, for 2 mL standard opening (8 mm)
screw top vials
200 µL Glass 100/pk
5183-2090
Vial insert, with graduations 250 µL Polypropylene 100/pk
5190-4073
Vial insert 250 µL Glass with polymer feet Y 100/pk
5181-1270
Vial insert 250 µL Deactivated glass with
polymer feet
Y 100/pk
5181-8872
Vial insert, graduated to 300 µL in increments of 100 µL.
Do not fill to more than 250 µL
250 µL Polypropylene with
polymer feet
Y 100/pk
5182-0549
Vial insert 250 µL Pulled point glass Y 100/pk
5183-2085
Vial insert, conical 250 µL Polymer feet Y 25,000/pk
5185-5958
Vial insert, flat bottom 250 µL Glass Y 50,000/pk
5067-0212
Vial insert 350 µL Glass 1,000/pk
5188-5321
Vial insert, flat bottom 400 µL Glass Y 500/pk
5181-3377
Vial insert, flat bottom 400 µL Deactivated glass Y 500/pk
5183-2086
Cap for 350 µL glass insert 1,000/pk
5188-5322
Ordering Information
20 Agilent Vials and Sample Containment Solutions
5182-05675182-34545181-8872 5183-2085 5181-3377
Tips and tools
You can also use our Vial Selection Tool to search by instrument manufacturer.
Visit www.agilent.com/chem/order-infinitylab-well-plates-sealing-mats
Ordering Information
21
www.agilent.com/chem/vials
Well plates
All well plates are made using polypropylene.
Mats
All mats are made with silicone and are preslit for best use with HPLC samplers.
No. of Wells Well Volume Well Shape Bottom Shape Height Unit Part No. Recommended Mat
96 2.0 mL Square U 41 mm 30/pk 5043-9300
5043-9319
96 1.7 mL Round U 45 mm 30/pk 5043-9302
5043-9317 / 5043-9318
96 0.9 mL Round U 32 mm 50/pk 5043-9305
5043-9317 / 5043-9318
96 1.0 mL Round U 27 mm 25/pk 5043-9308
5043-9317 / 5043-9318
96 1.0 mL Round U 27 mm 50/pk 5043-9309
5043-9317 / 5043-9318
96 0.45 mL Round U 14 mm 30/pk 5043-9310
5042-1389
96 0.45 mL Round U 14 mm 120/pk 5043-9311
5042-1389
96 0.3 mL Round V 14 mm 25/pk 5043-9312
5042-1389
96 0.3 mL Round V 14 mm 50/pk 5043-9313
5042-1389
96 0.3 mL Round V 14 mm 100/pk 5043-9314
5042-1389
384 0.17 mL Square V 22 mm 25/pk 5043-9315
5043-9320
5042-13895043-9310
5042-1389
No. of Wells Well Shape Unit Part No.
96 Round 50/pk
5043-9317
96 Round 100/pk
5043-9318
96 Square 50/pk
5043-9319
384 Square 50/pk
5043-9320
96 Round 50/pk
5042-1389
Containment Solutions for Sample Volumes of 2 mL
Vials
Description Certied 100/pk 1,000/pk 10,000/pk 50,000/pk 100,000/pk
Crimp top
Clear Y
5181-3375 5183-4491 5185-5852
A-Line, clear, with write-on spot Y
5190-9591
Clear, with write-on spot Y
5182-0543 5183-4492
Clear, wide Y
5190-6116 5190-6123
Clear, wide, with write-on spot Y
5190-6117 5190-6124
A-Line, amber, with write-on spot Y
5190-9592
Amber, with write-on spot Y
5181-3376 5183-4493 5190-6113
Crimp/snap top polypropylene for CE
Clear
5182-9697
Amber, with write-on spot
5183-4619
Screw top
Clear, 8-425
5183-4428
Clear Y
5182-0714 5183-2067 5185-5918
A-Line, clear, with write-on spot Y
5190-9589
Clear, with write-on spot Y
5182-0715 5183-2068 5190-6126
Clear, with write-on spot, 8 mm
8010-0010
Amber, 8-425
5183-4429
Amber Y
5188-6535 5188-6536 5190-6114 5190-6121
A-Line, amber, with write-on spot Y
5190-9590
Amber, with write-on spot Y
5182-0716 5183-2069 5190-6115 5190-6122
Amber, with write-on spot, 8 mm
8010-0012
Snap top
Clear
5182-0544 5183-4504 5185-5934
Clear, with write-on spot
5182-0546 5183-4505
Amber, with write-on spot Y
5182-0545 5183-4506
Deactivated (silanized) crimp top
Clear Y
5183-4494
Clear, with write-on spot Y
5183-4495
Amber, with write-on spot Y
5183-4496
Ordering Information
22 Agilent Vials and Sample Containment Solutions
5181-3375 5183-2067 5182-0716
5188-5386
(continued)
Description Certied 100/pk 1,000/pk 10,000/pk 50,000/pk 100,000/pk
Deactivated (silanized) screw top
Clear Y
5183-2070
Clear, 8-425
5183-4432
Clear, with write-on spot Y
5183-2071
Amber, 8-425
5183-4433
Amber, with write-on spot Y
5183-2072
Ordering Information
23
www.agilent.com/chem/vials
Crimp Caps
Cap Color Septa Type Certied 25/pk 100/pk 500/pk 1,000/pk 5,000/pk 10,000/pk 100,000/pk
11 mm crimp caps
Blue aluminum Red PTFE/rubber
5181-1215
Blue aluminum Clear/red PTFE/silicone
5190-9045
Blue aluminum PTFE/silicone/PTFE Y
5190-4074
Gold steel, magnetic White silicone/PTFE
5188-5386
Green aluminum Red PTFE/rubber
5181-1216
Green aluminum PTFE/silicone/PTFE Y
5190-6096
Red aluminum Red PTFE/rubber
5181-1217
Red aluminum PTFE/silicone/PTFE Y
5190-4075
Silver aluminum Black fluorocarbon Y
5181-1212
Silver aluminum PTFE/butyl
8010-0051
Silver aluminum Red PTFE/rubber
5181-1210 5061-3370 5183-4498 5190-4053 5185-5851
Silver aluminum Rubber
5190-6151
Silver aluminum PTFE/silicone Y
5182-0552 5183-4500
Silver aluminum PTFE/silicone
5190-4052 5190-3186
Silver aluminum PTFE/silicone/PTFE Y
5181-1211 5183-4499
Silver aluminum PTFE/silicone/PTFE
5190-4051
Silver aluminum Thin membrane Y
5190-6169 5182-0871
Silver aluminum Preslit PTFE/silicone
8010-0582
8 mm crimp caps
Silver aluminum PTFE/silicone/PTFE
5180-0842
5188-5386 5181-1212
Ordering Information
24 Agilent Vials and Sample Containment Solutions
Screw Caps
Cap Description Septa Type Certied 100/pk 250/pk 500/pk 1,000/pk 5,000/pk 50,000/pk
12 mm screw caps
Mixed colors
(5 packs of 50)
PTFE/silicone Y
5182-0721 5040-4682
9 mm screw caps
Black PTFE/red silicone Y
5185-5838
Blue, bonded Preslit PTFE/red silicone
5185-5824 5040-4649
Blue, bonded PTFE/red silicone
5185-5823
Blue, bonded PTFE/white silicone Y
5190-7021
Blue, bonded Preslit PTFE/white silicone Y
5190-7023
Blue, bonded
PTFE/red silicone
Y
5190-7024
Blue Preslit PTFE/red silicone Y
5183-2076 5185-5865
Blue PTFE-lined solid top Y
5183-2075
Blue PTFE/red silicone Y
5182-0717 5185-5820 5190-1599 5190-4049 5185-5917
Blue PTFE/white silicone Y
5182-0720 5185-5862 5190-4050
Blue PTFE/red silicone
5190-3156 8010-0186
Blue PTFE/red silicone/PTFE Y
5182-0723 8010-0187
Blue PTFE/white silicone Y
5185-5863
Blue, open top No septa Y
5182-0728
Blue, magnetic PTFE/red silicone Y
5191-8160
Blue, magnetic Preslit PTFE/red silicone Y
5191-8161
Green, bonded PTFE/red silicone Y
5190-7025
Green, bonded PTFE/white silicone Y
5190-7026
Green, bonded Preslit PTFE/red silicone Y
5190-7028
Green Preslit PTFE/red silicone Y
5183-2077
Green PTFE/red silicone Y
5182-0718 5185-5829
Green PTFE/white silicone Y
5182-0721 5185-5864
Green PTFE/red silicone/PTFE Y
5182-0724 5185-5861
Green, open top No septa Y
5182-0727
Purple PTFE/silicone Y
5040-4681
Red, bonded PTFE/red silicone Y
5190-7029
Red, bonded PTFE/white silicone Y
5190-7030
Red, bonded Preslit PTFE/red silicone Y
5190-7032
5185-5823 5182-0717 5191-8161
(continued)
Ordering Information
25
www.agilent.com/chem/vials
Cap Description Septa Type Certied 100/pk 250/pk 500/pk 1,000/pk 5,000/pk 50,000/pk
Red PTFE/white silicone/PTFE
8010-0188
Clear, thin membrane Clear polypropylene Y
5191-8151
Red Preslit PTFE/silicone Y
5183-2078
Red PTFE/red silicone Y
5182-0719
Red PTFE/white silicone Y
5182-0722
Red PTFE/red silicone/PTFE Y
5182-0725
Red, open top No septa Y
5182-0726
Turquoise PTFE/silicone
5040-4683
8 mm screw caps
Black Red PTFE/white silicone
5183-4442
Black No septa
5183-4438
Black PTFE/silicone/PTFE
8010-0063
Red PTFE/silicone/PTFE
8010-0068
Orange Preslit PTFE/silicone
8010-0142
Snap Caps
Cap Color Septa Type Certied 100/pk 500/pk 1,000/pk 50,000/pk
12 mm snap caps
Blue PTFE/red silicone
5182-3458
Blue PTFE/silicone
5182-0541
Clear Preslit PTFE/silicone
5183-4511
Clear Solid polyethylene membrane
5182-0542
Clear Red silicone/PTFE
5182-0550 8010-0189 5190-2267
Clear PTFE/red silicone/PTFE
5182-0566
Green Red silicone/PTFE
5182-3457
Red Red silicone/PTFE
5182-3459 5182-0564
Clear Polyurethane
5181-1512* 5042-6491*
Cream Solid polyethylene olefin
5181-1507* 5181-1513*
5183-2075 5183-4511 5182-0566
*CanbeusedforCE-basedapplications.
Ordering Information
26 Agilent Vials and Sample Containment Solutions
Autosampler vial convenience pack Pre-assembled screw top vial pack
Autosampler Vial Convenience Packs (2 mL)
Convenience packs are an easy way to get 500 of each component using one part number.
Packed in our six-drawer, reusable blue plastic cabinet, 500 vials and caps with septa installed are kept dust-free.
Description Septa Type Cap Color Certied 500/pk
Crimp top
Clear PTFE/red rubber Silver
5181-3400
Clear, with write-on spot PTFE/red rubber Silver Y
5190-2241
Amber PTFE/red rubber Silver
5181-8801
Screw top
Clear, bonded Preslit PTFE/silicone Blue Y
5067-0205
Clear Preslit PTFE/silicone Blue Y
5183-2079
Clear PTFE/red silicone Blue Y
5182-0732
Clear PTFE/silicone Blue Y
5182-0734
Clear PTFE/silicone/PTFE Blue Y
5182-0736
Clear, with write-on spot Preslit PTFE/silicone Blue Y
5183-2080
Clear, with write-on spot PTFE/red rubber Blue Y
5182-0867
Clear, with write-on spot PTFE/silicone Blue Y
5182-0868
Clear, with write-on spot PTFE/silicone/PTFE Blue Y
5182-0869
Amber, with write-on spot Preslit PTFE/silicone Green Y
5183-2081
Amber, with write-on spot PTFE/red rubber Green Y
5182-0733
Amber, with write-on spot PTFE/silicone Green Y
5182-0735
Amber, with write-on spot PTFE/silicone/PTFE Green Y
5182-0737
Pre-assembled Screw Top Vial Packs (2 mL)
Pre-assembled packs come ready-to-use with the cap and septum of your choice attached to the vial. A time- and labor-saving product
for use with your Agilent autosampler or any rotating tray automatic sampler.
Description Septa Type Cap Color Certied 100/pk
Clear Preslit PTFE/red silicone Blue Y
5183-2082
Clear PTFE/red silicone Blue Y
5182-0553
Clear PTFE/red silicone/PTFE Blue Y
5182-0555
Clear PTFE/red silicone Blue Y
5182-0557
(continued)
8010-0425 8010-0426 8010-0414
Ordering Information
27
www.agilent.com/chem/vials
Description Septa Type Cap Color Certied 100/pk
Clear, with write-on spot Preslit PTFE/red silicone Blue Y
5183-2083
Clear, with write-on spot PTFE/red silicone Blue Y
5182-0864
Clear, with write-on spot PTFE/red silicone Blue Y
5182-0865
Clear, with write-on spot PTFE/red silicone/PTFE Blue Y
5182-0866
Amber PTFE/red silicone Green Y
5182-0558
Amber PTFE/red silicone/PTFE Green Y
5182-0556
Amber, with write-on spot PTFE/red silicone Green Y
5182-0554
Vial Kits (2 mL)
Vial kits with a volume of 2 mL are packs of vials with caps. These kits are not pre-assembled and do not come in storage drawers
like the convenience pack.
Vial Description Septa Type Cap Color Certied 100/pk 10,000/pk 50,000/pk 100,000/pk
Crimp top
Clear PTFE/silicone Silver
8010-0195
Clear glass vial bundle PTFE/red rubber Silver Y
5185-5946
Amber PTFE/silicone Silver
8010-0196
Amber PTFE/red rubber Silver Y
5067-0214
Screw top
Clear PTFE/red silicone Blue Y
5185-5950 5067-0237
Clear Y
5190-6118 5190-6125
Clear, with write-on spot Y
5190-6119
Clear PTFE/silicone septa Blue
8010-0198
Clear glass vial and cap pack Preslit PTFE/silicone Red
8010-0425
Clear glass vial and cap pack PTFE/butyl Black
8010-0426
Clear glass vial and cap pack, standard opening (8 mm) PTFE/silicone Black
8010-0414
Clear glass with write-on spot, (9 mm). Similar to
Waters 186000307C, National Scientific C4000-95W,
Chromacol MEL, and La-Pha-Pack 11 23 1051
Preslit PTFE/silicone Blue
8010-0542
Clear glass 8-425 PTFE-lined solid storage
5183-4518
Amber PTFE/silicone septa Blue
8010-0199
Amber, with write-on spot, 9 mm Preslit PTFE/silicone Blue
8010-0543
Amber glass vial and cap pack, standard opening (8 mm) PTFE/silicone Black
8010-0415
Ordering Information
28 Agilent Vials and Sample Containment Solutions
Containment Solutions for Sample Volumes (>2 mL)
Screw Top Vials (4 mL)
Description Size Unit Part No.
Clear 15 x 45 mm 100/pk
5183-4448
Clear, with write-on spot 15 x 45 mm 100/pk
5067-0246
Amber 15 x 45 mm 100/pk
5183-4450
Amber, with write-on spot 15 x 45 mm 100/pk
5067-0247
Vial Kits (4 mL)
Vial Type Septa Type Cap Size/Color Unit Part No.
Clear glass
Similar to Waters 186000838C,
Dionex/Thermo 03-375-3G,
National Scientific C4015-1
PTFE/silicone 13 mm, black 100/pk
8010-0553
Amber glass
Similar to Waters 186001133C,
Dionex/Thermo 03-375-3P,
National Scientific C4015-2
PTFE/silicone 13 mm, black 100/pk
8010-0554
Wash vial, with fill markings No septa 25/pk
5182-0551
Vials (6 mL) and Associated 16 mm Caps, Caps with Septum, and Septum Only
Description Certied Units Part No.
Vial, screw top, clear glass, flat bottom, 6 mL Y 100/pk
9301-1377
Vial, crimp top, clear glass, flat bottom, 6 mL 100/pk
9301-1419
Cap, screw, with preslit PTFE/silicone septa, 16 mm 100/pk
8010-0102
Cap, screw, PTFE/silicone septa, 16 mm 100/pk
8010-0101
Septa, preslit PTFE/silicone, 16 mm Y 100/pk
5188-2758
Septa, for 6 mL vials Y 100/pk
9301-1378
Screw cap, for 6 mL vials 100/pk
9301-1379
Screw Caps for 4 mL Vials
Description Material Unit Part No.
Black PTFE/silicone septa 100/pk
5183-4464
Black No septa 100/pk
5183-4461
Septa
Description Unit Part No.
Red PTFE/white silicone 100/pk
5183-4460
PTFE/natural rubber 144/pk
9301-1031
White virgin PTFE 1,000/pk
5183-4459
9301-1377
Ordering Information
29
www.agilent.com/chem/vials
Agilent 7693A automatic liquid sampler
Ensure you have an inert sample pathway for smooth
GC performance without analyte degradation or loss.
Go to www.agilent.com/chem/7693a
Caps and Septa (10 mL)
Description Material Unit Part No.
Snap caps and seals for 10 mL wash vials 10/pk
G6500-88027
Septa, 22 mm PTFE/silicone 100/pk
8010-0564
Headspace Vials
Description Size Certied Unit Flat Bottom Round Bottom
Crimp top, glass
Clear 10 mL, 23 x 46 mm Y 100/pk
5182-0838 5183-4475
100/pk
5190-6147
Y 1,000/pk
8010-0179
Clear, with graduation marks and write-on spot 10 mL, 23 x 46 mm 100/pk
5190-2285
Clear 20 mL, 23 x 75 mm Y 100/pk
5182-0837 5183-4474
20 mL, 23 x 75 mm Y 10,000/pk
5185-5957 5067-0235
Clear, with graduation marks and write-on spot 20 mL, 23 x 75 mm 100/pk
5190-2288
Clear 22 mL 100/pk
8010-0152
Amber 10 mL, 23 x 46 mm Y 100/pk
5067-0227 5190-2238
Amber, with graduation marks and write-on spot 10 mL, 23 x 46 mm 100/pk
5190-2287
Amber 20 mL, 23 x 75 mm Y 100/pk
5067-0226 5190-2239
Amber, with graduation marks and write-on spot 20 mL, 23 x 75 mm 100/pk
5190-2286
Screw top, glass
Clear 10 mL, 23 x 46 mm 100/pk
5188-5392
Clear 20 mL, 23 x 75 mm 100/pk
5188-2753
20 mL, 23 x 75 mm 1,000/pk
8010-0180
Amber 10 mL, 23 x 46 mm 100/pk
5188-6538
Amber 20 mL, 23 x 75 mm 100/pk
5188-6537
Seals
Description Unit Part No.
Seals for wash and waste vials,
10/20/100 mL
20/pk
MLAL1000023
5188-27595182-0837 5183-4479 5182-0840
Ordering Information
30 Agilent Vials and Sample Containment Solutions
Headspace Caps
Description Size Septa Type Certied 100/pk 1,000/pk 10,000/pk
Crimp caps
Silver aluminum 20 mm Molded PTFE/butyl Y
5190-2258
20 mm
PTFE/silicone
Y
5183-4477 5190-2257
20 mm PTFE/silicone
9301-1425
20 mm Tan PTFE/white silicone
8010-0191
20 mm No septa
9301-0721
Silver aluminum, with safety feature
20 mm Molded PTFE/butyl Y 5183-4479
20 mm Molded PTFE/butyl
5183-4480
20 mm PTFE/silicone Y
5183-4478 5067-0236
20 mm No septa
9301-0718
Bimetal, magnetic 20 mm PTFE/silicone
8010-0420
Steel, magnetic 20 mm Tan PTFE/silicone
8010-0165
20 mm Silicone/PTFE
8010-0424
20 mm High temperature septa Y
5190-3987
18 mm PTFE/butyl septa
8010-0140
Screw caps
Steel, magnetic 18 mm PTFE/silicone (white top, blue bottom)
5188-2759
18 mm High temperature septa
5190-3986
Headspace Septa and Stoppers
Description Septa Type Certied 100/pk 1,000/pk 10,000/pk
Septa
18 mm Blue PTFE/silicone
8010-0418
20 mm Tan PTFE/white silicone Y
9301-0719 8010-0192
20 mm Tan PTFE/white silicone Y
5067-0234
20 mm Red molded silicone/white PTFE
250-030-DAN
Stoppers
Gray butyl stopper, 20 mm, –40/120 ºC Y
5183-4476
Ordering Information
31
www.agilent.com/chem/vials
Headspace Kits
Description Septa Type Cap Color/Type Certied 100/pk
Crimp top
Glass vial, clear, flat bottom, 10 mL PTFE/silicone Silver
8010-0412
Glass vial, clear, flat bottom, 20 mL PTFE/silicone Silver
8010-0413
Glass vial, clear, flat bottom, 20 mL PTFE/black butyl Silver, with safety feature Y
5182-0839
Glass vial, clear, flat bottom, 20 mL Molded PTFE/silicone Silver, with safety feature Y
5182-0840
Screw top
Glass vial, clear, round bottom, 20 mL PTFE/silicone Silver magnetic
8010-0417
LC High Recovery Vials
Description Size Certied 30/pk
Screw top, clear glass 15 mL Y
5188-5369
Vials, Caps, and Septa for Archon Purge and Trap
Description Size Certied 24/pk 60/pk 72/pk 100/pk
Vial kits
Clear, precleaned vials, caps, and septa 40 mL
5183-4741
Amber, precleaned vials, caps, and septa 40 mL
5183-4742
Screw caps
Cap, screw 40 mL
5183-4744
Cap, screw, red 40 mL Y
5190-6172
Septa
Precleaned, for 40 mL vials
5183-4743
EPA low-bleed 22 mm
5190-3976
PTFE/silicone 22 mm
5190-3978
Storage Vials
Vial Size Unit Cap Size Vial Type Septa Type Closed Top Open Top
4 mL, 15 x 45 mm 100/pk 13-425 Clear PTFE/silicone
5183-4311 5183-4331
100/pk 13-425 Amber PTFE/silicone
5183-4321
12 mL, 19 x 65 mm 100/pk 15-425 Clear PTFE/silicone
5183-4312 5183-4332
100/pk 15-425 Amber PTFE/silicone
5183-4322
22 mL, 23 x 85 mm 100/pk 20-400 Clear PTFE/silicone
5183-4313 5183-4333
100/pk 20-400 Amber PTFE/silicone
5183-4323
40 mL, 28 x 95 mm 100/pk 24-414 Clear PTFE/silicone
5183-4314 5183-4334
100/pk 24-414 Amber PTFE/silicone
5183-4324
100/pk 24-414 Amber PTFE/silicone
5190-4000
Ordering Information
32 Agilent Vials and Sample Containment Solutions
Bonded Caps
Cap Size Unit Cap Color Cap Type Septa Type Closed Top Open Top
13-425 100/pk White Polypropylene PTFE/silicone
5183-4301 5183-4305
15-425 100/pk White Polypropylene PTFE/silicone
5183-4302 5183-4306
20-400 100/pk White Polypropylene PTFE/silicone
5183-4303 5183-4307
24-414 100/pk White Polypropylene PTFE/silicone
5183-4304 5183-4308
Test Tubes
Description Size Certied 100/pk 250/pk
12 x 48 mm 3.5 mL
5022-6534
16 x 48 mm 7 mL
5022-6533
12 x 100 mm 8.5 mL
5022-6531
16 x 100 mm 13 mL
5022-6532
30 x 48 mm, round bottom glass 20 mL Y
5042-6470
16 x 150 mm 21 mL
5190-9092
25 x 100 mm, round bottom glass 40 mL
5042-6459
25 x 150 mm 55 mL
5190-9091
30 x 100 mm, round bottom glass 60 mL
5042-6458
30 x 150 mm 78 mL
5190-9090
Agilent 90-day warranty and money-back guarantee
All Agilent vials are designed and manufactured to stringent standards under the Agilent quality
system registered to ISO 9001. If Agilent receives notice of defects during the warranty period,
Agilent shall either repair or replace products that prove to be defective. If Agilent is unable,
within a reasonable time, to repair or replace any product to the warranted condition, the buyer
shall be entitled to a refund of the purchase price upon return of the product to Agilent.
Accessories
33
www.agilent.com/chem/vials
Description Part No.
Crimper
Electronic crimper, 11 mm, with lithium battery
5191-5616
Electronic crimper, 20 mm, with lithium battery
5191-5615
Decapper
Electronic decapper, 11 mm, with lithium battery
5191-5614
Electronic decapper, 20 mm, with lithium battery
5191-5613
Replacement lithium battery for crimper and decapper
5190-3192
Replace your manual crimpers with the next stage
in crimping technology
Agilent handheld electronic crimpers deliver tight, reproducible seals every time.
Slim, adjustable steel jaws fit around closely spaced vials, enabling you to crimp vials
directly in crowded autosampler trays. Handheld electronic decappers remove caps
instantly, and are designed for labs that recycle or re-use vials.
Save Time and Simplify Routine Tasks
5190-4066
(stand only)
5191-5615
Cut your crimping time in half with Agilent
high-power electronic crimpers
Electronic crimpers give you the power to crimp vials in half the time of a manual crimper.
We recommend the high-power crimper if you are using steel caps.
Description Cap Size Part No.
High-power electronic crimping tool, with power supply
5191-5617
Base for electronic crimping tool
5190-4066
Crimper jaw set for high-power electronic crimper 11 mm
5190-4062
Decapper jaw set for high-power electronic crimp tool 11 mm
5190-4063
Crimper jaw set for high-power electronic crimper 20 mm
5190-4064
Decapper jaw set for high-power electronic crimper 20 mm
5190-4065
High-power crimping tool and jaw set bundle 20 mm
5191-5624
ACCESSORIES
Tips and tools
Accessories
34 Agilent Vials and Sample Containment Solutions
Stop wrist strain with ergonomic Agilent manual crimpers,
for higher throughput on a limited budget
With their lightweight, tailored design, Agilent manual crimpers and decappers help eliminate the problem of sore,
pinched hands. They are also built to last; the 11 mm crimper will complete at least 100,000 cappings, and the
20 mm crimper will complete at least 60,000 cappings.
Description Cap Size Part No.
Crimper
Ergonomic manual crimper 11 mm
5040-4667
Ergonomic manual crimper 20 mm
5040-4669
Decapper
Ergonomic manual decapper 11 mm
5040-4668
Ergonomic manual decapper 20 mm
5040-4671
5040-4667
Watch our “Crimping a Vial Made Easy” video at
www.agilent.com/chem/crimpingvideo
The right vial is only a few clicks away
Use our online selection tool to quickly find the right products
for complete confidence in your sample containment.
– Answer a few simple questions to identify your best options
– Search by technique, product number, vial type,
or instrument manufacturer
– Choose from over 600 vials, caps, and septa
Go to www.agilent.com/chem/selectvials
Agilent Services and Support
35
www.agilent.com/chem/vials
Technical support
Agilent CrossLab: Supporting Your Success
CrossLab is an Agilent capability that integrates services and consumables to
support workflow success, improve productivity, and enhance operational
efficiency. In every interaction, we strive to provide insights that help you
achieve your goals. We offer a wide range of products and services – from
method optimization and training to full-lab relocations and operations analytics
– to help you manage your instruments and your lab for best performance.
Learn more about CrossLab at www.agilent.com/crosslab.
Have a hardware, software, application, instrument repair, or troubleshooting
question? Agilent technical experts are available to answer your questions.
With years of laboratory experience, our technical support specialists can provide
in-depth knowledge and experience.
For questions about supplies found in this catalog, contact your local Agilent office
or authorized Agilent distributor. Or visit www.agilent.com/chem/techsupport.
Need more information?
Visit www.agilent.com/chem/contactus to:
– Locate your nearest Agilent office or distributor for expert technical support.
– Get fast sales and product assistance by phone. Simply use the scroll-down
menu to select your country.
– Receive email assistance using our convenient online forms.
This information is subject to change without notice.
© Agilent Technologies, Inc. 2022
Published in the USA, June 1, 2022
5994-4803EN
Learn more
www.agilent.com/chem/vialsresources
Contact us:
www.agilent.com/chem/contactus
Buy online:
www.agilent.com/store
Get social with Agilent:
www.agilent.com/chem/social
Explore our full range of catalogs:
www.agilent.com/chem/catalog
DE94864253
